Pocket Sliding Glass Doors

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Door" – news · newspapers · books · scholar · JSTOR (July 2024) (Learn how and when to remove this message)

A door is a hinged or otherwise movable barrier that allows ingress (entry) into and egress (exit) from an enclosure. The created opening in the wall is a doorway or portal. A door's essential and primary purpose is to provide security by controlling access to the doorway (portal). Conventionally, it is a panel that fits into the doorway of a building, room, or vehicle. Doors are generally made of a material suited to the door's task. They are commonly attached by hinges, but can move by other means, such as slides or counterbalancing.

The door may be able to move in various ways (at angles away from the doorway/portal, by sliding on a plane parallel to the frame, by folding in angles on a parallel plane, or by spinning along an axis at the center of the frame) to allow or prevent ingress or egress. In most cases, a door's interior matches its exterior side. But in other cases (e.g., a vehicle door) the two sides are radically different.

Many doors incorporate locking mechanisms to ensure that only some people can open them (such as with a key). Doors may have devices such as knockers or doorbells by which people outside announce their presence. Apart from providing access into and out of a space, doors may have the secondary functions of ensuring privacy by preventing unwanted attention from outsiders, of separating areas with different functions, of allowing light to pass into and out of a space, of controlling ventilation or air drafts so that interiors may be more effectively heated or cooled, of dampening noise, and of blocking the spread of fire.

Doors can have aesthetic, symbolic, ritualistic purposes. Receiving the key to a door can signify a change in status from outsider to insider.^[1] Doors and doorways frequently appear in literature and the arts with metaphorical or allegorical import as a portent of change.

The earliest recorded doors appear in the paintings of Egyptian tombs, which show them as single or double doors, each of a single piece of wood. People may have believed these were doors to the afterlife, and some include designs of the afterlife. In Egypt, where the climate is intensely dry, doors were not framed against warping, but in other countries required framed doors—which, according to Vitruvius (iv. 6.) was done with stiles (sea/si) and rails (see: Frame and panel), the enclosed panels filled with tympana set in grooves in the stiles and rails. The stiles were the vertical boards, one of which, tenoned or hinged, is known as the hanging stile, the other as the middle or meeting stile. The horizontal cross pieces are the top rail, bottom rail, and middle or intermediate rails.

The most ancient doors were made of timber, such as those referred to in the Biblical depiction of King Solomon's temple being in olive wood (I Kings vi. 31–35), which were carved and overlaid with gold. The doors that Homer mentions appear to have been cased in silver or brass. Besides olive wood, elm, cedar, oak and cypress were used. Two doors over 5,000 years old have been found by archaeologists near Zürich, Switzerland.^[2][3]

Stone door in Hampi (India)

A massive door socket from Persepolis (modern-day Iran)

Ancient doors were hung by pintles at the top and bottom of the hanging stile, which worked in sockets in the lintel and sill, the latter in some hard stone such as basalt or granite. Those Hilprecht found at Nippur, dating from 2000 BC, were in dolerite. The tenons of the gates at Balawat were sheathed with bronze (now in the British Museum). These doors or gates were hung in two leaves, each about 2.54 m (100 in) wide and 8.2 m (27 ft) high; they were encased with bronze bands or strips, 25.4 cm (10.0 in) high, covered with repoussé decoration of figures. The wood doors would seem to have been about 7.62 cm (3.00 in) thick, but the hanging stile was over 360 millimetres (14 in) diameter. Other sheathings of various sizes in bronze show this was a universal method adopted to protect the wood pivots. In the Hauran in Syria where timber is scarce, the doors were made of stone, and one measuring 1.63 by 0.79 m (64 by 31 in) is in the British Museum; the band on the meeting stile shows that it was one of the leaves of a double door. At Kuffeir near Bostra in Syria, Burckhardt found stone doors, 2.74 to 3.048 m (8.99 to 10.00 ft) high, being the entrance doors of the town. In Etruria many stone doors are referred to by Dennis.

Ancient Greek and Roman doors were either single doors, double doors, triple doors, sliding doors or folding doors, in the last case the leaves were hinged and folded back. In the tomb of Theron at Agrigentum there is a single four-panel door carved in stone. In the Blundell collection is a bas-relief of a temple with double doors, each leaf with five panels. Among existing examples, the bronze doors in the church of SS. Cosmas and Damiano, in Rome, are important examples of Roman metal work of the best period; they are in two leaves, each with two panels, and are framed in bronze. Those of the Pantheon are similar in design, with narrow horizontal panels in addition, at the top, bottom and middle. Two other bronze doors of the Roman period are in the Lateran Basilica.

The Greek scholar Heron of Alexandria created the earliest known automatic door in the first century AD during the era of Roman Egypt.^[4] The first foot-sensor-activated automatic door was made in China during the reign of Emperor Yang of Sui (r. 604–618), who had one installed for his royal library.^[4] Gates powered by water featured in illustrations of the automatons of the Arab inventor Al-Jazari.^[5][6]

Copper and its alloys were integral in medieval architecture. The doors of the church of the Nativity at Bethlehem (6th century) are covered with plates of bronze, cut out in patterns. Those of Hagia Sophia at Constantinople, of the eighth and ninth century, are wrought in bronze, and the west doors of the cathedral of Aix-la-Chapelle (9th century), of similar manufacture, were probably brought from Constantinople, as also some of those in St. Marks, Venice. The bronze doors on the Aachen Cathedral in Germany date back to about 800 AD. Bronze baptistery doors at the Cathedral of Florence were completed in 1423 by Ghiberti.^[7] (For more information, see: Copper in architecture).

Of the 11th and 12th centuries there are numerous examples of bronze doors, the earliest being one at Hildesheim, Germany (1015). The Hildesheim design affected the concept of Gniezno door in Poland. Of others in South Italy and Sicily, the following are the finest: in Sant'Andrea, Amalfi (1060); Salerno (1099); Canosa di Puglia (1111); Troia, two doors (1119 and 1124); Ravello (1179), by Barisano of Trani, who also made doors for Trani cathedral; and in Monreale and Pisa cathedrals, by Bonano of Pisa. In all these cases the hanging stile had pivots at the top and bottom. The exact period when the builder moved to the hinge is unknown, but the change apparently brought about another method of strengthening and decorating doors—wrought-iron bands of various designs. As a rule, three bands with ornamental work constitute the hinges, with rings outside the hanging stiles that fit on vertical tenons set into the masonry or wooden frame. There is an early example of the 12th century in Lincoln. In France, the metalwork of the doors of Notre Dame at Paris is a beautiful example, but many others exist throughout France and England.

In Italy, celebrated doors include those of the Battistero di San Giovanni (Florence), which are all in bronze—including the door frames. The modeling of the figures, birds and foliage of the south doorway, by Andrea Pisano (1330), and of the east doorway by Ghiberti (1425–1452), are of great beauty. In the north door (1402–1424), Ghiberti adopted the same scheme of design for the paneling and figure subjects as Andrea Pisano, but in the east door, the rectangular panels are all filled, with bas-reliefs that illustrate Scripture subjects and innumerable figures. These may the gates of Paradise of which Michelangelo speaks.

Doors of the mosques in Cairo were of two kinds: those externally cased with sheets of bronze or iron, cut in decorative patterns, and incised or inlaid, with bosses in relief; and those of wood-framed with interlaced square and diamond designs. The latter design is Coptic in origin. The doors of the palace at Palermo, which were made by Saracenic workmen for the Normans, are fine examples in good preservation. A somewhat similar decorative class of door is found in Verona, where the edges of the stiles and rails are beveled and notched.

In the Renaissance period, Italian doors are quite simple, their architects trusting more to the doorways for effect; but in France and Germany the contrary is the case, the doors being elaborately carved, especially in the Louis XIV and Louis XV periods, and sometimes with architectural features such as columns and entablatures with pediment and niches, the doorway being in plain masonry. While in Italy the tendency was to give scale by increasing the number of panels, in France the contrary seems to have been the rule; and one of the great doors at Fontainebleau, which is in two leaves, is entirely carried out as if consisting of one great panel only.

The earliest Renaissance doors in France are those of the cathedral of St. Sauveur at Aix (1503). In the lower panels there are figures 3 ft (0.91 m). high in Gothic niches, and in the upper panels a double range of niches with figures about 2 ft (0.61 m). high with canopies over them, all carved in cedar. The south door of Beauvais Cathedral is in some respects the finest in France; the upper panels are carved in high relief with figure subjects and canopies over them. The doors of the church at Gisors (1575) are carved with figures in niches subdivided by classic pilasters superimposed. In St. Maclou at Rouen are three magnificently carved doors; those by Jean Goujon have figures in niches on each side, and others in a group of great beauty in the center. The other doors, probably about forty to fifty years later, are enriched with bas-reliefs, landscapes, figures and elaborate interlaced borders.

NASA's Vehicle Assembly Building at the Kennedy Space Center contains the four largest doors. The Vehicle Assembly Building was originally built for the assembly of the Apollo missions' Saturn vehicles and was then used to support Space Shuttle operations. Each of the four doors are 139 meters (456 feet) high.^[8]

The oldest door in England can be found in Westminster Abbey and dates from 1050.^[9] In England in the 17th century the door panels were raised with bolection or projecting moldings, sometimes richly carved, around them; in the 18th century the moldings worked on the stiles and rails were carved with the egg-and-dart ornament.

• Short visual history of doors
• 
  Fragment from an Ancient Egyptian tomb door, circa 2150 –1981 BC, in the Metropolitan Museum of Art (New York City)
• 
  Ancient Greek door carved on the Hercules sarcophagus from the Kayseri Archaeology Museum (Kayseri, Turkey)
• 
  Ancient Roman bronze doors of the Curia Julia, now in the Basilica of St. John Lateran (Rome)
• 
  Indian Mughal teak wood and brass door
• 
  Traditional Chinese folding doors in The Old Museum of Wisteria (Changzhou, China)
• 
  Byzantine door of the Little Metropolis (Athens, Greece)
• 
  Islamic door decorated with geometric patterns in Morocco
• 
  Romanesque door of the Saint Nicholas' Church in Barfrestone (Kent, England)
• 
  Gothic door of the St Magnus Cathedral (Kirkwall, Scotland)
• 
  Russian door in Saint Basil's Cathedral (Moscow)
• 
  Brâncovenesc door of the Antim Monastery (Bucharest, Romania), with a pisanie above it
• 
  Renaissance door in Gdańsk (Poland)
• 
  Baroque door in the Palace of Versailles (Versailles, France)
• 
  Rococo door on Rue Monsieur-le-Prince (Paris)
• 
  Louis XVI door of the Hôtel Mortier de Sandreville, on Rue des Francs-Bourgeois (Paris)
• 
  Neoclassical painted double-leaf door, 1790s, by , in the Cleveland Museum of Art (US)
• 
  African door with lock, late 19th or early 20th century, wood with iron, from Burkina Faso, in the Brooklyn Museum (New York City)
• 
  A decorated door from the Gandantegchinlen Monastery (Mongolia)
• 
  Gothic Revival door on Rue Malebranche (Paris)
• 
  Egyptian Revival door of a mausoleum in the Forest Home Cemetery (Wisconsin, US)
• 
  Rococo Revival door of the Hôtel de Breteuil (Paris)
• 
  Romanian Revival door of the Școala Centrală National College on Strada Icoanei (Bucharest)
• 
  19th century Eclectic Classicist door on Rue La Bruyère (Paris)
• 
  Beaux-Arts door of the Cantacuzino Palace (Bucharest)
• 
  Art Nouveau metal and glass door in Nancy (France), with a big transparent awning above it
• 
  Stripped Classicist door of the Royal Palace of Bucharest, now the National Museum of Art of Romania
• 
  Art Deco door in Angers (France)
• 
  Wooden church door in Born auf dem Darß (Germany)

There are many kinds of doors, with different purposes:

• The most common type is the single-leaf door, which consists of a single rigid panel that fills the doorway. There are many variations on this basic design, such as the double-leaf door or double door and French windows, which have two adjacent independent panels hinged on each side of the doorway.^{[citation needed]}
• A half door or Dutch door or stable door is divided in half horizontally. Traditionally the top half opens so a worker can feed a horse or other animal while the bottom half remains closed to keep the animal inside. This style of door has been adapted for homes.
• Saloon doors are a pair of lightweight swing doors often found in public bars, and especially associated with the American west. Saloon doors, also known as cafe doors, often use bidirectional hinges that close the door regardless of which direction it opens by incorporating springs. Saloon doors that only extend from knee-level to chest-level are known as batwing doors.^{[citation needed]}
• A blind door, Gibb door, or jib door has no visible trim or operable components. It blends with the adjacent wall in all finishes, to appear as part of the wall—a disguised door.^[10]

• A French door consists of a frame around one or more transparent or translucent panels (called lights or lites) that may be installed singly, in matching pairs, or even as series. A matching pair of these doors is called a French window, as it resembles a door-height casement window. When a pair of French doors is used as a French window, the application does not generally include a central mullion (as do some casement window pairs), thus allowing a wider unobstructed opening. The frame typically requires a weather strip at floor level and where the doors meet to prevent water ingress. An espagnolette bolt may let the head and foot of each door be secured in one movement. The slender window joinery maximizes light into the room and minimizes the visual impact of the doorway joinery when considered externally. The doors of a French window often open outward onto a balconet, balcony, porch, or terrace and they may provide an entrance to a garden.
• A louvered door has fixed or movable wooden fins (often called slats or louvers) which permit open ventilation while preserving privacy and preventing the passage of light to the interior. Being relatively weak structures, they are most commonly used for wardrobes and drying rooms, where security is of less importance than good ventilation, although a very similar structure is commonly used to form window shutters. Double louvred doors were introduced into Seagate, built in Florida in 1929 by Gwendolyn and Powel Crosley, that provided the desired circulation of air with an added degree of privacy in that it is impossible to see through the fins in any direction.
• A composite door is a single leaf door that can be solid or with glass, and is usually filled with high density foam. In the United Kingdom, composite doors are commonly certified to BS PAS 23/24^[11] and be compliant with Secured by Design, an official UK police initiative.^[12]
• A steel security door is one which is made from strong steel, often for use on vaults and safe rooms to withstand attack. These may also be fitted with wooden outer panels to resemble standard internal and external doors.^[13]
• A flush door is a completely smooth door, having plywood or MDF fixed over a light timber frame, the hollow parts of which are often filled with a cardboard core material.^{[citation needed]} Skins can also be made out of hardboards, the first of which was invented by William H Mason in 1924. Called Masonite, its construction involved pressing and steaming wood chips into boards. Flush doors are most commonly employed in the interior of a dwelling, although slightly more substantial versions are occasionally used as exterior doors, especially within hotels and other buildings containing many independent dwellings.
• A moulded door has the same structure as that of flush door. The only difference is that the surface material is a moulded skin made of MDF. Skins can also be made out of hardboards.^{[citation needed]}
• A ledge and brace door often called board and batten doors are made from multiple vertical boards fixed together by two or more horizontal timbers called ledges (or battens) and sometimes kept square by additional diagonal timbers called braces.^{[citation needed]}
• A wicket door is a pedestrian door built into a much larger door allowing access without requiring the opening of the larger door. Examples might be found on the ceremonial door of a cathedral or in a large vehicle door in a garage or hangar.
• A bifold door is a unit that has several sections, folding in pairs. Wood is the most common material, and doors may also be metal or glass. Bifolds are most commonly made for closets, but may also be used as units between rooms. Bi-fold doors are essentially now doors that let the outside in. They open in concert; where the panels fold up against one another and are pushed together when opened. The main door panel (often known as the traffic door) is accompanied by a stack of panels that fold very neatly against one another when opened fully, which almost look like room dividers.^[14]
• A sliding glass door, sometimes called an Arcadia door or patio door, is a door made of glass that slides open and sometimes has a screen (a removable metal mesh that covers the door).
• Australian doors are a pair of plywood swinging doors often found in Australian public houses.^{[citation needed]} These doors are generally red or brown in color and bear a resemblance to the more formal doors found in other British Colonies' public houses.
• A false door is a wall decoration with the appearance of a window.^{[citation needed]} In ancient Egyptian architecture, this was a common element in a tomb, the false door representing a gate to the afterlife. They can also be found in the funerary architecture of the desert tribes (e.g., Libyan Ghirza).

Most doors are hinged along one side to allow the door to pivot away from the doorway in one direction, but not the other. The axis of rotation is usually vertical. In some cases, such as hinged garage doors, the axis may be horizontal, above the door opening.

Doors can be hinged so that the axis of rotation is not in the plane of the door to reduce the space required on the side to which the door opens. This requires a mechanism so that the axis of rotation is on the side other than that in which the door opens. This is sometimes the case in trains or airplanes, such as for the door to the toilet, which opens inward.

• A swing door has special single-action hinges that allow it to open either outward or inward, and is usually sprung to keep it closed.
• French doors are derived from the French design called the casement door. It is a door with lites where all or some panels would be in a casement door. A French door traditionally has a moulded panel at the bottom of the door. It is called a French window when used in a pair as double-leaved doors with large glass panels in each door leaf, and in which the doors may swing out (typically) as well as in.
• A double-acting door, patented in 1880 by the Dutch-American engineer Lorenz Bommer, swings both ways. They are often used in areas where many people are likely to pass through, such as restaurant kitchens.^[15][16]
• A Dutch door or stable door consists of two halves. The top half operates independently from the bottom half. A variant exists in which opening the top part separately is possible, but because the lower part has a lip on the inside, closing the top part, while leaving the lower part open, is not.
• A garden door resembles a French window (with lites), but is more secure because only one door is operable. The hinge of the operating door is next to the adjacent fixed door and the latch is located at the wall opening jamb rather than between the two doors or with the use of an espagnolette bolt.
• A Lev door or convection door is an internal floor-to-ceiling (full height) door, consisting of a standard door leaf and an upper leaf in place of the usual header wall. The leaves may or may not be separated by a transom. The doors enable effective convection of warm air.

It is often useful to have doors which slide along tracks, often for space or aesthetic considerations.

A bypass door is a door unit that has two or more sections. The doors can slide in either direction along one axis on parallel overhead tracks, sliding past each other. They are most commonly used in closets to provide access one side of the closet at a time. Doors in a bypass unit overlap slightly when viewed from the front so they do not have a visible gap when closed.

Doors which slide inside a wall cavity are called pocket doors. This type of door is used in tight spaces where privacy is also required. The door slab is mounted to roller and a track at the top of the door and slides inside a wall.

Sliding glass doors are common in many houses, particularly as an entrance to the backyard. Such doors are also popular for use for the entrances to commercial structures, although they are not counted as fire exit doors. The door that moves is called the "active leaf", while the door that remains fixed is called the "inactive leaf".

• A revolving door has several wings or leaves, generally four, radiating from a central shaft, forming compartments that rotate about a vertical axis. A revolving door allows people to pass in both directions without colliding, and forms an airlock maintaining a seal between inside and out.
• A pivot door, instead of hinges, is supported on a bearing some distance away from the edge, so that there is more or less of a gap on the pivot side as well as the opening side. In some cases the pivot is central, creating two equal openings.

A high-speed door is a very fast door some with opening speeds of up to 4 m/s, mainly used in the industrial sector where the speed of a door has an effect on production logistics, temperature and pressure control. High-speed cleanroom doors, usually consisting of a transparent material on a stainless steel frame, are used in pharmaceutical industries to allow passage between work areas while admitting minimal contaminants. The powerful high-speed doors have a smooth surface structure and no protruding edges, allowing minimal particle retention and easy cleaning.

High-speed doors are made to handle a high number of openings, generally more than 200,000 a year. They must be built with heavy-duty parts and counterbalance systems for speed enhancement and emergency opening function. The door curtain was originally made of PVC, but was later also developed in aluminium and acrylic glass sections. High-speed refrigeration and cold-room doors with excellent insulation values have also been introduced for green and energy-saving requirements.

In North America, the Door and Access Systems Manufacturing Association (DASMA) defines high-performance doors as non-residential powered doors characterized by rolling, folding, sliding or swinging action, that are either high-cycle (minimum 100 cycles/day) or high-speed (minimum 20 inches (508 mm)/second), and two out of three of the following: made-to-order for exact size and custom features, able to withstand equipment impact (break-away if accidentally hit by vehicle), or able to sustain heavy use with minimal maintenance.

Automatically opening doors are powered open and closed either by electricity, spring, or both. There are several methods by which an automatically opening door is activated:

1. A sensor detects traffic is approaching. Sensors for automatic doors are generally:
   • A pressure sensor – e.g., a floor mat which reacts to the pressure of someone standing on it.
   • An infrared curtain or beam which shines invisible light onto sensors; if someone or something blocks the beam the door is triggered open.
   • A motion sensor which uses low-power microwave radar for the same effect.
   • A remote sensor (e.g. based on infrared or radio waves) can be triggered by a portable remote control, or is installed inside a vehicle. These are popular for garage doors.
2. A switch is operated manually, perhaps after security checks. This can be a push button switch or a swipe card.
3. The act of pushing or pulling the door triggers the open and close cycle. These are also known as power-assisted doors.

In addition to activation sensors, automatically opening doors are generally fitted with safety sensors. These are usually an infrared curtain or beam, but can be a pressure mat fitted on the swing side of the door. The safety sensor prevents the door from colliding with an object by stopping or slowing its motion. A mechanism in modern automatic doors ensures that the door can open in a power failure.

• Up-and-over or overhead doors are often used in garages. Instead of hinges, it has a mechanism, often counterbalanced or sprung, so it can lift and rest horizontally above the opening. A roller shutter or sectional overhead door is one variant of this type.
• A tambour door or roller door is an up-and-over door made of narrow horizontal slats that rolls up and down by sliding along vertical tracks; it is typically found in entertainment centres and cabinets.
• Rebated doors, a term chiefly used in Britain, are double doors with a lip or overlap (i.e. a rabbet) on the vertical edge(s) where they meet. Fire-rating can be achieved with an applied edge-guard or astragal molding on the meeting stile, in accordance with the American fire door.

Architectural doors have numerous general and specialized uses. Doors are generally used to separate interior spaces (closets, rooms, etc.) for convenience, privacy, safety, and security reasons. Doors are also used to secure passages into a building from the exterior, for reasons of climate control and safety.

Doors also are applied in more specialized cases:

• A blast-proof door is constructed to allow access to a structure as well as to provide protection from the force of explosions.
• A garden door is any door that opens to a backyard or garden. This term is often used specifically for French windows, double French doors (with lites instead of panels), in place of a sliding glass door. The term also may refer to what is known as patio doors.^[17]
• A jib door is a concealed door, whose surface reflects the moldings and finishes of the wall. These were used in historic English houses, mainly as servants' doors.^{[18]: 101â€ÅÂ} 
• A pet door (also known as a cat flap or dog door) is an opening in a door to allow pets to enter and exit without the main door's being opened. It may be simply covered by a rubber flap, or it may be an actual door hinged on the top that the pet can push through. Pet doors may be mounted in a sliding glass door as a new (permanent or temporary) panel. Pet doors may be unidirectional, only allowing pets to exit. Additionally, pet doors may be electronic, only allowing animals with a special electronic tag to enter.
• A trapdoor is a door that is oriented horizontally in a ceiling or floor, often accessed via a ladder.
• A water door or water entrance, such as those used in Venice, Italy, is a door leading from a building built on the water, such as a canal, to the water itself where, for example, one may enter or exit a private boat or water taxi.^[19][20]

Panel doors, also called stile and rail doors, are built with frame and panel construction. EN 12519 is describing the terms which are officially used in European Member States. The main parts are listed below:

• Stiles – Vertical boards that run the full height of a door and compose its right and left edges. The hinges are mounted to the fixed side (known as the "hanging stile"), and the handle, lock, bolt or latch are mounted on the swinging side (known as the "latch stile").
• Rails – Horizontal boards at the top, bottom, and optionally in the middle of a door that join the two stiles and split the door into two or more rows of panels. The "top rail" and "bottom rail" are named for their positions. The bottom rail is also known as "kick rail". A middle rail at the height of the bolt is known as the "lock rail", other middle rails are commonly known as "cross rails".
• Mullions – Smaller optional vertical boards that run between two rails, and split the door into two or more columns of panels, the term is used sometimes for verticals in doors, but more often (UK and Australia) it refers to verticals in windows.
• Muntin – Optional vertical members that divide the door into smaller panels.
• Panels – Large, wider boards used to fill the space between the stiles, rails, and mullions. The panels typically fit into grooves in the other pieces, and help to keep the door rigid. Panels may be flat, or in raised panel designs. Can be glued in or stay as a floating panel.
• Light – a piece of glass used in place of a panel, essentially giving the door a window.

Also known as ledges and braced, board and batten doors are an older design consisting primarily of vertical slats:

• Planks – Boards wider than 9" that extend the full height of the door, and are placed side by side filling the door's width.
• Ledges and braces – Ledges extend horizontally across the door which the boards are affixed to. The ledges hold the planks together. When diagonally they are called braces which prevent the door from skewing. On some doors, especially antique ones, the ledges are replaced with iron bars that are often built into the hinges as extensions of the door-side plates.

As board and batten doors.

Impact-resistant doors have rounded stile edges to dissipate energy and minimize edge chipping, scratching and denting. The formed edges are often made of an engineered material. Impact-resistant doors excel in high traffic areas such as hospitals, schools, hotels and coastal areas.

This type consists of a solid timber frame, filled on one face, face with tongue and groove boards. Quite often used externally with the boards on the weather face.

Flushing of a door means the door is flush with the face of the wall on either side.

• Stiles and rails – As above, but usually smaller. They form the outside edges of the door.
• Core material: Material within the door used simply to fill space, provide rigidity and reduce druminess.
  • Hollow-core – Often consists of a lattice or honeycomb made of corrugated cardboard, extruded polystyrene foam, or thin wooden slats. Can also be built with staggered wooden blocks. Hollow-core molded doors are commonly used as interior doors.^[21]
    • Lock block – A solid block of wood mounted within a hollow-core flush door near the bolt to provide a solid and stable location for mounting the door's hardware.
  • Stave-core – Consists of wooden slats stacked upon one another in a manner similar to a board & batten door (though the slats are usually thinner) or the wooden-block hollow-core (except that the space is entirely filled).
  • Solid-core – Can consist of low-density particle board or foam used to completely fill the space within the door. Solid-core flush doors (especially foam-core ones) are commonly used as exterior doors because they provide more insulation and strength.
• Skin – The front and back faces of the door are covered with HDF/MDF skins.

Generally, door swings, or handing, are determined while standing on the outside or less secure side of the door while facing the door (i.e., standing on the side requiring a key to open, going from outside to inside, or from public to private).

It is important to get the hand and swing correct on exterior doors, as the transom is usually sloped and sealed to resist water entry, and properly drain. In some custom millwork (or with some master carpenters), the manufacture or installer bevels the leading edge (the first edge to meet the jamb as the door closes) so that the door fits tight without binding. Specifying an incorrect hand or swing can make the door bind, not close properly, or leak. Fixing this error is expensive or time-consuming. In North America, many doors now come with factory-installed hinges, pre-hung on the jamb and sills.

While facing the door from the outside or less secure side, if the hinge is on the right side of the door, the door is "right handed"; or if the hinge is on the left, it is "left handed". If the door swings toward you, it is "reverse swing"; or if the door swings away from you, it is "normal swing".

In other words:

• In the United States:
  • Left hand hinge (LHH): Standing outside (or on the less secure side, or on the public side of the door), the hinges are on the left and the door opens in (away from you).
  • Right hand hinge (RHH): Standing outside (or on the less secure side), the hinges are on the right and the door opens in (away from you).
  • Left hand reverse (LHR): Standing outside the house (or on the less secure side), the hinges are on the left, knob on right, on opening the door it swings toward you (i.e. the door swings open toward the outside, or "outswing")
  • Right hand reverse (RHR): Standing outside the house (i.e. on the less secure side), the hinges are on the right, knob on left, opening the door by pulling the door toward you (i.e. open swings to the outside, or "outswing")
• In Europe:
  • One of the oldest DIN standard applies: DIN 107 "Building construction; identification of right and left side" (first 1922–05, current 1974–04) defines that doors are categorized from the side where the door hinges can be seen. If the hinges are on the left, it is a DIN Left door (DIN Links, DIN gauche), if the hinges are on the right, it is a DIN Right door (DIN Rechts, DIN droite). The DIN Right and DIN Left marking are also used to categorize matching installation material such as mortise locks (referenced in DIN 107). The European Standard DIN EN 12519 "Windows and pedestrian doors. Terminology" includes these definitions of orientation.
• In Australia:
  • The "refrigerator rule" applies, and a refrigerator door is not opened from the inside. If the hinges are on the right then it is a right hand (or right hung) door. (Australian Standards for Installation of Timber Doorsets, AS 1909–1984 pg 6.)
  • In public buildings, exterior doors open to the outside to comply with applicable fire codes. In a fire, a door that opens inward could cause a crush of people who cannot open it.^[22]

New exterior doors are largely defined by the type of materials they are made from: wood, steel, fiberglass, UPVC/vinyl, aluminum, composite, glass (patio doors), etc.

Wooden doors – including solid wood doors – are a top choice for many homeowners, largely because of the aesthetic qualities of wood. Many wood doors are custom-made, but they have several downsides: their price, their maintenance requirements (regular painting and staining) and their limited insulating value^[23] (R-5 to R-6, not including the effects of the glass elements of the doors). Wood doors often have an overhang requirement to maintain a warranty. An overhang is a roof, porch area or awning that helps to protect the door and its finish from UV rays.

Steel doors are another major type of residential front doors; most of them come with a polyurethane or other type of foam insulation core – a critical factor in a building's overall comfort and efficiency. Steel doors mostly in default comes along with frame and lock system, which is a high cost efficiency factor compared to wooden doors.

Most modern exterior walls provide thermal insulation and energy efficiency, which can be indicated by the Energy Star label or the passive house standards. Premium composite (including steel doors with a thick core of polyurethane or other foam), fiberglass and vinyl doors benefit from the materials they are made from, from a thermal perspective.

In architecture and construction, a sliding glass door (also patio door or doorwall^[1][2]) is a type of sliding door made predominantly from glass, that is situated in an external wall to provide egress and light. The doors can give access to a backyard or patio while providing a pleasant view,^[3][4] and when not fully covered can be a source of passive daylighting. Like a window, when open it also provides fresh air and copious natural light. It is considered a single unit consisting of two or more panel sections, some or all being mobile to slide open. Another design, a wall-sized glass pocket door has one or more panels movable and sliding into wall pockets, completely disappearing for a 'wide open' indoor-outdoor room experience.

The sliding glass door was introduced as a significant element of pre-war International style architecture in Europe and North America. Their predecessor is the sliding Shōji and Fusuma panel door in traditional Japanese architecture. The post-war building boom in modernist and Mid-century modern styles, and on to suburban ranch-style tract houses, multi-unit housing, and hotel-motel chains has made them a standard element in residential and hospitality building construction in many regions and countries.^[5]

"Handedness" of a sliding door is expressed as seen by an observer outside the building. When standing outside, a left-handed door opens from left to right (when closed, the handle is on the far left), and a right-handed door opens from right to left (when closed, the handle is on the far right). These relationships are sometimes described with the letters O and X, where O is the fixed panel and X is the sliding panel. The O/X notation allows the description of doors with more than two panels.

Sliding-door terminology

Denotaton	Panels	Panel motion	Description
OX or right-handed	2	$\displaystyle -\leftarrow$	Right panel slides left
XO or left-handed	2	$\displaystyle \rightarrow -$	Left panel slides right
OX-O	3	$\displaystyle -\leftarrow -$	Center panel slides left
O-XO	3	$\displaystyle -\rightarrow -$	Center panel slides right
XOOX	4	$\displaystyle \rightarrow --\leftarrow$	Outer panels slide toward the center
OXXO	4	$\displaystyle -\leftarrow \rightarrow -$	Center panels slide toward outer ones

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (January 2023) (Learn how and when to remove this message)

The traditional sliding doors design has two-panel sections, one fixed-stationary and one mobile to slide open. The actual sliding door is a movable rectangular framed sheet of window glass that is mounted parallel to a similar and often fixed similarly framed neighboring glass partition. The movable panel slides in a fixed track usually, and in its own plane parallel to the neighboring stationary panel.

A specialty form, for Washitsu or "Japanese-style rooms," creates sliding Shōji and Fusuma panel doors, with traditional materials for interior uses^[6] and contemporary adaptations for exterior exposure and uses. They are used in themed and contemporary restaurants, residences, Japanese garden tea houses, and other situations. Specialty manufacturers are located in Japan and Western countries

Another sliding doors design, glass pocket doors has all the glass panels sliding completely into open-wall pockets, totally disappearing for a wall-less 'wide open' indoor-outdoor room experience. This can include corner window walls, for even more blurring of the inside-outside open space distinction. Two-story versions are often electronically opened, using remote controls. For wide expanses, the opening point is centered, and three to six parallel tracks are used to carry the six to twelve sliding doors into the wall pockets on each side. Their recent popularity, shelter magazine coverage and technical and structural innovations have brought many options to market.

A third sliding doors design has all the glass panels suspended from above, leaving a trackless and uninterrupted floor plane. They also disappear into side pockets. On final closure, they slightly drop down to create a weatherproof seal. A German manufacturer developed the original technology, and its use is predominantly in temperate climates.

The sliding glass doors can be adapted to slide away from a corner connection leaving no corner post or framing in its wake. The corner stile is made up of two vertical profiles, a male and female section, which slot together and then slide away with the sliding doors. This meeting point does not have to be 90 degrees; it can also be an inverted corner allowing these frames to fit within any design seamlessly.

Swinging glass doors are a better choice than the typical sliding glass doors, since they offer a much tighter seal,^[7] but glass – even the best type of glass, chosen according to the climate zone – is always a poor insulator, making doors based on them a poor choice from a thermal comfort perspective. To reduce their negative thermal impact on the living space, glass doors should have insulated frames and be double or triple glazed, with low-emissivity coatings and gas-filling (typically argon). Metal-framed glass doors should also have thermal breaks. The doors should be properly sized and protected (using shades, blinds, curtains and other means).

Sliding glass doors are popular in Southern Europe and throughout the United States, being used in: hotel rooms, condominiums, apartments, and residences; for access to upper balconies; for large views out - enhanced natural light in; and to increase incoming fresh air. In addition Sliding glass doors are commonly used in some regions as doors between the interior rooms of a home and a courtyard, deck, balcony, patio, and a garden, backyard, barbecue or swimming pool area. They are often called patio doors in this context. They are also used in interior design, often in offices and automobile sales areas, to give soundproof but visually accessible private office space. In residential interiors they are used, often with translucent 'frosted' glass replicating a traditional Shōji door, to allow daylight to penetrate further into the dwelling and expand the sense of interior spatial size.^[6]

Special sliding glass doors called platform screen doors are used on railway platforms in order to protect waiting passengers from the elements as well as to prevent suicide attempts. They're sometimes found on bathroom shower doors.^[8]

Sliding glass door frames are often made from wood, aluminum, stainless steel, or steel, which also have the most strength. The most common material is PVC plastic. Replacement parts are most commonly needed for the moving-sliding parts of the door, such as the steel rollers that glide within the track and the locking mechanisms.

Glass in the doors can be either externally fitted or internally fitted, with internally fitted being the high-security design, depending on the specification the manufacturer implements in the design. To comply with energy conservation codes and for noise reduction, sliding glass doors are usually double glazed, and often treated for UV reflection. They usually have no mullions, unless attempting to appear part of a revival architectural style and then often using 'snap-on' faux grids.

Security design in the doors is aimed at preventing the doors both fixed and sliding from being lifted off their rails, anti-lift blocks can be fixed to the top of the frame to prevent the lifting of the door off its rails, in theory preventing unauthorised entry to the room when sliding door is in the closed position.

A rotating security bar, commonly known as a "Charley bar"^[9] can also be fitted from inside the room to prevent the sliding action when the door is closed. A portable security bar can also be used for added security when traveling, preventing intruders from breaking in while occupants are away.

• French door
• Sustainable architecture
• Sustainable design